380T Allowance for machinery or plant.

(1) Where, for any chargeable period, expenditure incurred by a person on a new installation includes expenditure (in this section referred to as “qualifying expenditure’) on the provision of new machinery or new plant (other than vehicles suitable for the conveyance by road of persons or goods or the haulage by road of other vehicles) provided for use in the relevant trade, then the following provisions shall apply:

(a) that person may claim that the wear and tear allowance to be made under section 284 to the person in respect of that expenditure is to be determined as if the reference to 12.5 per cent in section 284(2)(ad) were a reference to 100 per cent, and

(b) there shall be made to the person for the chargeable period related to the expenditure an allowance equal to 50 per cent of the qualifying expenditure in relation to that plant or machinery, and such allowance shall be made in taxing the relevant trade.

(2) For the purposes of ascertaining the amount of any allowance to be made to any person under section 284 in respect of expenditure incurred during a chargeable period on any qualifying machinery or plant, no account shall be taken of an allowance under subsection (1)(b) in respect of that expenditure, and in section 284(4) “the allowances on that account” and “the allowances” where it occurs before “exceed” shall each be construed as not including a reference to any allowance made under subsection (1)(b) to the person by whom the relevant trade is carried on.